|
Pullex Crocodile System comes with
the following three parts:
 1 x Frame (C30 or C60)
1 x Fixing Plate (Shank or Blade type)
1 set Pulling Plates (PFD-1)
|
|
|
C30 - 1-30 mm
|
|
C60 - 30-60 mm
|
|
|
|
|
How to select the right fixing plate for Pullex Crocodile.
Square shank part-off tool
1.
|
When you have a shank part-off tool to be mounted on a tool holder you shall
use the fixing plates with a flange together with the part-off tool in the tool
holder.
|
2.
|
When you have a square shank part-off tool and there is no space for the flange,
you should use the fixing plate without a flange. This is a frequent occurrence when mounting
the square shank part-off tool directly on the turret.
|
|
|
|
|
C302 (Suitable for C30)
|
C602 (Suitable for C60)
|
C303 (Suitable for C30)
|
C603 (Suitable for C60)
|
|
|
Blade part-off tool
1. Employ the fixing plate to the right if you use any of the following tool holders:
|
a)
b)
c)
|
- Iscar tool holder (for blade 26/21,4)
- Sandvik tool holder (blade 25,9/21,4)
- Iscar tool holder (for blade 32/24,8)
- Iscar tool holder (for blade 32/24,8)
- Sandvik tool holder (for blade 31,9/25)
- Mircona tool holder (for blade 32/25)
|
type SGTBU-20-5G
type SGTBU-25-5G
type 151.2-202021M
type SGTBU-20-6G
type SGTBU-20C-6
type SGTBU-25-6G
type SGTBU-25C-6
type SGTBU-32-6G
type SGTBU-32-25-6G
type 151.2.3232-25
type TB56C-25-32
type TB56C-32-32
|
|
C301-A1
C601-A1
C601-A2
|
2. For other tool holders in blade style, choose the fixing plate to the right:
|
a)
b)
|
- Tool holder for blade ~26/21,4
- Tool holder for blade ~32/25
|
|
|
C301
C601
|
|
|
|
|
Pulling plates
|
PFD-1
|
Pulling plates must be ordered separately.
They come in sets of 2 pcs.
|
|
|
|
Maskinportalen
for machine tool
industry.
- News
- Agent register
- Suppliers
- Links etc.
maskinportalen.se
|
|
|
|
|
home page
)
)
